4 Port Type-C USB 3.1 Super-Speed Plus Hub

The CG-4P31CHUB USB 3.1 Type-C Hub is a light weight hub with a DIN Rail Mounting Kit. This hub supports USB 3.1 Super-Speed Plus (10Gbps data transfer) with (2) USB Type-A female and (2) USB female Type-C downstream ports.

The CG-4P31CHUB USB 3.1 Type-C Hub uses a 2-pin terminal block connection for input power of +7 – 24V DC for the downstream facing ports (power supply is included). It is backward compatible with 5Gbps (Super-Speed), 480Mbps(High-Speed), 12Mbps(Full-Speed), and 1.5Mbps(Low-Speed) data rates. The plastic Mounting plate for the DIN Rail Clips snaps on to the bottom of the hub for secure mounting. Upstream information is carried with the USB-C connection on the back panel of the hub.

4 Port Type-C USB 3.1 Gen2 Hub Features

• Compliant with USB 3.1 Gen2 Specifications
• Rigid plastic Wall and DIN Rail Mounting Case.
• Provides 4 (2 USB-C and 2 USB-A) Downstream facing USB 3.1 Ports
• Supports 10Gbps(Super-Speed Plus), 5Gbps (Super-Speed), 480Mbps(High-Speed), 12Mbps(Full-Speed), and 1.5Mbps(Low-Speed) data rates
• Multi Transaction Translators (TT) per Hub
• Support USB Battery Charging: SDP, CDP and DCP modes
• Built with the VLI VL820-Q8 chip
• Item Dimensions: 152.04mm(L) x 62.45mm(W) x 30mm(H) – 152.04mm(L) x 67.67mm(W) with 2-pin connector x 34.25(H) with mounting plate

Environmental Specifications

• Operating Temp: o to 70°C (32 to 158°F)
• Operating Humidity: 5 to 95% RH

In The Box

• USB 3.1 Gen2 Type-C 4 Port Hub
• 3ft. USB-C Male to Male Gen2 Cable
• Wall and DIN Rail Mounting Plate
• Power Supply
• 4 rubber foot pads
• DIN Rail Mounting Kit
• Paper User Manual

The post 4 Port Type-C USB 3.1 Gen2 Hub VLI Chip with DIN Rail Mounting Kit appeared first on CoolGear.

USB 3.1 Gen1 High Temp Hub

The CG-G14PHHT is a USB3.1 Gen1 Industrial Hub that complies with Universal Serial Bus (USB) Specifications Revision 3.1 (Gen1) with up to 5Gbps data transmission. The USB 3.1 4 Port Hub operates with a wide temperature range from -40 to +85°C. It provides 4 downstream facing ports with standard A-type USB3.1 Gen 1 screw-lock connectors.

The industrial USB hub has a RISC-like USB3.1 Gen 1 controller; it is backward compatible when any one of downstream port is connected to an USB2.0/1.1 compliant device, or when the upstream port is connected to a USB2.0/1.1 compliant host.

The CG-G14PHHT provides a unique self-power mode to work with wide range (+7~48V) input DC power from its terminal blocks (power adapter sold separately). It supports USB charging specifications by turning its downstream ports from a Standard Downstream Port (SDP) into Charging Downstream Port (CDP) or Dedicated Charging Ports (DCP).

The CG-G14PHHT 4 Port USB 3.1 hub incorporates heat distribution plates on both sides of the hub and vents on both ends. The USB 3.1 Hub also has mounting options for flat surface or DIN Rail making it versatile for industrial applications.

4 Port USB 3.1 Gen1 Hub Features

• Compliant with USB Specification Rev. 3.1 Gen 1
• Metal Case with DIN RAIL Mounting Kit for Industrial Critical Applications
• Built-in RISC-like USB3.1 Gen 1 Hub Controller
• Provides 4 Downstream USB3.1 Gen 1 Facing Ports
• Supports 5Gbps (Super-speed), 480Mbps (High-speed),12Mbps (Full-speed) and 1.5Mbps (Low-speed) Speed
• Supports 15KV ESD Surge Protection for Each Port
• Multi Transaction Translators (TT) per Hub
• Supports +7~48V DC Wide Range Self-power Input
• Support USB Battery Charging: CDP and DCP modes
• Supports up to 3A USB Bus Power for Each Port
• Supports USB Screw-Lock Cable Mechanism
• Support Wide Operating Temperature: -40~85°C

Specifications

For systems with USB 3.1 Gen1, USB 2.0, or USB 1.1 Ports

USB3.1 Gen 1 ports

• Provides 4 USB downstream ports which managing up to 5Gbps:
• Compliant with USB Specifications 3.0
• Provides 4 USB3.1 Gen 1 Downstream Facing Ports
• Supports 5Gbps, 480Mbps, 12Mbps and 1.5Mbps Speed
• Supports Multi Transaction Translators per Hub
• Supports +7~48V DC Wide Range Input Self-power Mode from Terminal Blocks
• Supports 1.5A USB Bus Power for Each Downstream Port
• Supports USB Screw-lock Cable Mechanism
• Built-in 15KV ESD Surge Protection for each port.

USB Devices

Supports keyboard, mouse, monitor, scanner, printer, PC Camera, telephone, DVD drive, joystick, virtual reality helmet, modem, PBX and many more USB devices

I/O Hardware

• Supports 4 external USB3.1 Gen 1 Type-A connectors and 1 USB3.1 Gen 1 Type-B Upstream connector.
• Supports a 2-pin Terminal Block Connector for external power input from AC adapter.

Environmental

• Operating Temp.: -40 to 85°C (-40 to 185°F)
• Storage Temp: -40 to 85°C (-4 to 185°F)
• Operating Humidity: 5 to 95% RH

Form Factor

6.41”(L)x2.48”(W)x1.71”(H) (163.0×63.0x31.0 mm)

Package Contents

• 4-Port USB3.1 Gen1 Induatrial Hub
• 5ft. USB Screw lock A to B Cable
• 2-Wire Terminal Plug
• DIN Rail Clip & Screws
• Paper Installation Guide

The post 4-Port USB3.1 Gen 1 Industrial High Temperature Hub w/Mounting Kit appeared first on Coolgear.

Compact, Mountable USB 3.1 Gen1 4 Port Hub

USB 3.1 powered hub with industrial-grade chassis and surface mounting flanges. The CG-U3MINI4PH is a 5V DC input, generation 1 USB 3.1 hub with ESD and Surge protection. This USB 3.1 Hub will support fast charging for Apple 1A/2.4A and Samsung Galaxy devices.

USB 3.1 Gen1 Hub DFP Labeled

Each port is protected individually to help keep your peripherals safe. The USB 3.1 Hub uses a GL 3510 chip, each port is on an individual circuit to maintain high current and protection. The GL3510 Hub controller chip features native fast-charging and complies with USB-IF battery charging specification rev1.2.

USB 3.1 4 Port Mini Hub Features

• Compliant with USB 3.1 Gen 1 Specification
• Upstream port supports Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
• Downstream ports support SS, HS, FS, and Low-Speed (LS) traffic
• 1 control pipe and 1 interrupt pipe
• Backward compatible to USB specification Revision 2.0/1.1
• Compliant with USB Battery Charging Revision v1.2, supporting CDP, DCP, and ACA-Dock
• Downstream ports can be turned from a Standard Downstream Port (SDP) into Charging Downstream Port (CDP) or Dedicated Charging Port (DCP)
• Downstream devices can be charged while upstream VBUS is not present, which can be applied on wall charger applications
• Upstream port is capable of charging and data communicating simultaneously for portable devices supporting ACA-Dock or proprietary charging protocols
• Supporting Apple 1A/2.1A/2.4A and Samsung Galaxy devices fast-charging
• Compatible with Windows XP, 7, 8,10, and Mac OS X

Specifications

• Chip: GL3510
• USB 3.1 Gen Compliant
• Supports High Speed and Full Speed transmit and Receive
• Complies with USB-IF battery charging specification rev1.2
• Automatic switching between self-powered and bus-powered modes
• Allows downstream ports to connect up to 8 devices, 4 x USB3.1 non-removable devices with 4 x USB2.0 non-removable devices or exposed ports
• Built-in 5 to 3.3V and 5 to 1.2V regulator
• RISC-like architecture

Package Contents

• USB 3.1 4-Port Hub
• 4Amp 5V DC Mini-Switching Power Adapter
• USB A to B Cable for Hub

The post USB 3.1 Powered 4 Port Mini Hub with ESD & Surge Protection appeared first on Coolgear.

The Coolgear USB 3.1 Type-C hub is a 4 port industrial metal hub with a very small form factor accommodating up to 5Gbps of data transmission. It’s surface mountable using the attached mounting flange. It supports Windows 7, 8, 8.1, 10, Linux, and Mac OS10.X operating systems and supports 5 hops to cascade with other hubs.

The USB 3.1 Type-C 4 port hub is Coolgear (Coolgear Labs) designed and is small enough to fit in the palm of your hand. Supporting USB 3.1 specifications, this hub transfers large amounts of super-speed data from its Type-C reversible downstream ports. Each of the USB 3.1 Gen1 ports supports up to 2A of power output. Operating USB equipment such as printers, scanners, portable drives, virtual reality gear and others are not a problem with this USB 3.1 4 port hub hub.

The CGL-4PUC31H can also act as a stand alone charger without a connection to a host to charge devices needing up to 2A power.

USB 3.1 4 Type-C Port Hub Features

• Supports systems with USB Type-A or Type-C ports
• Can Charge without the need for a host computer.
• Uses Pipe LED’s for port status
• Provides 4 Type-C reversible downstream ports supporting 5Gbps data speeds
• Compliant with USB 3.1 Gen1 specifications
• Provides 1 upstream Type-B port to the host computer
• Backward compatible with data speeds of up to 5Gbps Super-Speed, 480Mbps High-Speed, and 12Mbps Full-Speed, and 1.5Mbps Low-Speed
• Supports 15KV ESD surge protection for each port
• Form Factor Dimensions: 4.50in(L) x 2.26in(W) x 1.03in(H) (11.45 x 5.73 x 2.63 cm)
• Multi transaction translators (TT) per hub
• Supports +6 – 24V DC wide range self-power input (power adapter sold separately)
• Supports a 2-pin Terminal Block Connector for External power input from AC adapter

Environmental Information

• Operating Temp.: 0 – 70 C (32 to 150 F)
• Storage Temp.: -20 to 85 C (-4 to 185 F)
• Operating Humidity: 5 to 95% RH

The post USB 3.1 Type-C 4 Port Hub or Charger with 2A Per Port and ESD Protection appeared first on Coolgear.

7 USB 3.1 Gen1 Data Ports & 1 Dedicated Charging Port

Coolgear’s new CGL-6PC2PAH unique design USB 3.1 dual type 8 Port Hub provides six Type-C data ports and one Type-A data port. The remaining 8th port is a charge only port supporting QC2.0/3.0 quick charging and BC1.2 battery charging standards. Port eight supports up to 25 watts charging for Apple and Samsung devices.

The industrial-grade hub unique feature are its glowing USB-C ports that change from green to blue once connected. This serves as a great visual indicator that a solid port connection has been made. Each of the USB 3.1 Gen1 seven data ports supports up to 1.5A of power output. Operating USB equipment such as printers, scanners, portable drives, virtual reality gear and others are not a problem.

The CGL-6PC2PAH supports self-power through a 2-wire plug from an external 12V power supply (sold separately) which supports the single port #8 25W charging.

USB 3.1 Dual Type Hub Features

• Supports systems with USB Type-A or Type-C ports
• Provides (6) Type-C reversible downstream ports supporting 5Gbps data speeds
• Supports 15KV ESD surge protection for each port
• Supports +7 – 28V DC wide range self-power input through 2-pin terminal plug (power adapter sold separately)
• Is a self-powered hub with a 12V external power supply (sold Separately)
• Compliant with USB 3.1 Gen1 Specifications
• One 25W dedicated charging port / 6 USB-C data ports / 1 USB-A data port
• Compliant with QC2.0/3.0 Quick Charging specifications
• Supports AppleFast and Samsung Charging
• Compliant with battery charging specifications 1.2
• Led indicators each port
• Item Dimensions: 5.46in(L)(6.50 w/ears) x 2.589in(W) x 1.28in(H)
• Item weight: 12.1 oz (.756lbs.)
• Flat surface mountable

The post USB 3.1 Dual Type USB C & A 8 Port Hub with ESD and Surge Protection appeared first on Coolgear.

7 USB 3.1 Gen1 Data Ports and 1 Dedicated Type-A Charging Port

Coolgear’s new CG-8PUAU31H unique design USB 3.1 Type-A 8 Port Hub provides seven (7) Type-A data ports and one Type-A charging port. 7 ports support QC2.0/3.0 quick charging and BC1.2 battery charging standards. Port eight supports up to 25 watts charging for Apple and Samsung devices.

Each of the USB 3.1 Gen1 seven data ports supports 5Gbps data transfer and up to 1.5A of power output. Operating USB equipment such as printers, scanners, portable drives, virtual reality gear and others are not a problem. The remaining port does not transmit data, it is charge only.

The CG-8PUAU31H supports self-power through a 2-wire plug from an external 12V power supply (sold separately) which supports the single port #8 25W charging.

USB 3.1 Type-A Hub Features

• Supports systems with USB Type-A interface
• Provides (7) Type-A downstream data ports supporting 5Gbps data speeds
• Supports 15KV ESD surge protection for each port
• Supports +7 – 28V DC wide range self-power input through 2-pin terminal plug
• Is a self-powered hub with a 12V external power supply (sold Separately)
• Compliant with USB 3.1 Gen1 Specifications 5Gbps data speeds
• One 25W dedicated charging port / 7 USB-A data ports
• Compliant with QC2.0/3.0 Quick Charging specifications
• Supports AppleFast and Samsung Charging
• Compliant with battery charging specifications 1.2
• Led indicators each port
• Item Dimensions: 5.46in(L)(6.50 w/ears) x 2.589in(W) x 1.28in(H)
• Item weight: 12.1 oz (.756lbs.)
• Flat surface mountable

The post USB 3.1 Type-A 8 Port Hub with Dedicated Charging Port and ESD Protection appeared first on Coolgear.

USB 3.1 USB Hub Component Board for 4 Port Hubs

USB 3.1 4 port USB hub component board with ESD and surge protection. The Coolgear CG-3510S4-Board is a 5V DC input, generation 1 USB 3.1 hub circuit board for incorporating into equipment, assemblies, or a custom shells. It will support fast charging for Apple 1A/2.4A and Samsung Galaxy devices.

Each port is protected individually to help protect your peripheral investments. The USB 3.1 Hub component board uses a GL3510 chip. The GL3510 Hub controller chip features native fast-charging and complies with USB-IF battery charging specification rev1.2.

USB 3.1 4 Port Mini Hub Component Board Features

• Compliant with USB 3.1 Gen 1 Specification
• Upstream USB Type-B port supports Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
• 4 USB Type-A downstream ports support SS, H , FS, and Low-Speed (LS) traffic
• 1 control pipe and 1 interrupt pipe
• Backward compatible to USB specification Revision 2.0/1.1
• Compliant with USB Battery Charging Revision v1.2, supporting CDP, DCP, and ACA-Dock
• Downstream Type-A ports can be turned from a Standard Downstream Port (SDP) into Charging Downstream Port (CDP) or Dedicated Charging Port (DCP)
• Downstream devices can be charged while upstream VBUS is not present, which can be applied to charger applications
• Upstream port is capable of charging and data communicating simultaneously for portable devices supporting ACA-Dock or proprietary charging protocols
• Supporting Apple 1A/2.1A/2.4A and Samsung Galaxy devices fast-charging
• Compatible with Windows XP, 7, 8,10, and Mac OS X

Specifications

• Chip: GL3510
• USB 3.1 Gen Compliant
• Supports High Speed and Full Speed transmit and Receive
• Complies with USB-IF battery charging specification rev1.2
• Automatic switching between self-powered and bus-powered modes
• Built-in 5 to 3.3V and 5 to 1.2V regulator
• RISC-like architecture
• Item Dimensions: 60.33mm(L) x 39.98mm(W) x 17.67mm(H to connector top)

Package Contents

• USB 3.1 4-Port Hub Component Board

The post USB 3.1 4 Port Mini Hub Component Board with ESD & Surge Protection appeared first on Coolgear.

USB 3.1 Gen Micro Hub with 4 Ports and Surge Protection

The CG-MIC4P31H is a micro sized USB hub made to gen1 USB 3.1 specifications. With 4 USB Type-A downstream ports the hub will transfer data up to 5GBps. It is powered by 5V DC input through its 2 pin Phoenix connector for proper function.

The hub can be mounted using its included metal bracket; it can also be mounted using a Din Rail Clip not included. The hub is built to save space in industrial environments in its metal chassis.

4 Port USB 3.1 Micro Hub Features

• Supports systems with USB 3.0, 2.0, 1.1 ports
• Has power LED indicating power is on
• Provides 4 downstream ports supporting 5Gbps data speeds
• Provides 1 upstream Type-B port to the host computer
• Compliant with USB 3.1 specifications
• Built with RISC-like hub controller
• Data speeds of up to 5Gbps Super-Speed, 480Mbps High-Speed, and 12Mbps Full-Speed, and 1.5Mbps Low-Speed
• Supports +5V DC self-power input (power adapter sold separately) through 2 pin Phoenix connector
• Supports 15KV ESD surge protection for each port

Environmental

• Operating Temp.: 0 – 70 C (32 to 150 F)
• Storage Temp.: -20 to 85 C (-4 to 185 F)
• Operating Humidity: 5 to 95% RH

Package Contents

• 4 Port USB 3.1 Micro Hub
• 5ft. A to B USB 3.0 device cable
• Mounting bracket and (2) screws

The post 4 Port USB 3.1 Micro Hub with Surge Protection and Mounting Kit appeared first on Coolgear.

USB 3.1 Gen Micro Hub with 4 Ports, Variable Voltage, and Surge Protection

The CG-MIC4P31HVV is a micro sized USB hub made to Gen1 USB 3.1 specifications. Constructed with 4 USB 3.1 Type-A downstream ports, the hub will transfer data up to 5GBps. It is powered by variable 7-48V DC input through its 2 pin Phoenix connector.

The hub can be mounted in different positions using in its included metal bracket. It can also be mounted using a Din Rail Clip not included. The hub is built to save space in industrial environments in its metal chassis.

4 Port USB 3.1 Micro Hub Features

• Supports systems with USB 3.0, 2.0, 1.1 ports
• Has power LED indicating power is on
• Provides 4 downstream ports supporting 5Gbps data speeds
• Provides 1 upstream Type-B port to the host computer
• Compliant with USB 3.1 specifications
• Built with RISC-like hub controller
• Data speeds of up to 5Gbps Super-Speed, 480Mbps High-Speed, and 12Mbps Full-Speed, and 1.5Mbps Low-Speed
• Supports +7-48V DC self-power input (power adapter sold separately) through 2 pin Phoenix connector
• Supports 15KV ESD surge protection for each port

Environmental

• Operating Temp.: 0° – 70°C (32° to 150°F)
• Storage Temp.: -20° to 85°C (-4° to 185°F)
• Operating Humidity: 5 to 95% RH

Package Contents

• 4 Port USB 3.1 7-48V DC variable voltage Micro Hub
• 5ft. A to B USB 3.0 device cable
• Mounting bracket and (2) screws

The post 4 Port USB 3.1 Micro Hub with Variable Voltage and Surge Protection appeared first on Coolgear.

Specifications:

•  Supports Systems with USB 3.0, USB 2.0 or USB 1.1 Ports
•  Provides 4 USB 3.0 downstream ports which manage up to 5Gbps
•  4 Downstream Type-A ports support Super-speed, High-speed, Full-speed and Low-speed traffic
•  1 Upstream Type-B port for Super-speed, High-speed, Full-speed traffic and Low-speed
•  Transfer rates supported 5Gbps, 480Mbps and 12Mbps speed
•  Supports Self-powered Mode ( DC power source required )
•  Supports up to 900mA USB Bus Power for Each Down-stream Port in standard charging mode
•  Supports Downstream Port Status with LED
•  High power charging mode supported

USB Devices:

•  Supports keyboard, mouse, monitor, cell phone, tablet, scanner, printer, camera, optical drive, memory sticks, external hard drive, joystick, vr headset, modem, PBX and many more.

OS Support:

• Windows 2000, 2003, CE, Vista, Windows 7, and Windows 8, 10
• Linux and Mac OS 10.x

I/O Hardware:

• Supports 4 external USB 3.0 Type-A connectors and 1 Type-B Upstream connector
• Supports 1 2-pin Phoenix connector Terminal Block for external power input.

Environmental Specifications:

• Operating Temp: 0 to 55°C (32 to 131°F)
• Operating Humidity: 5 to 95% RH

Chipset:

• GL3520

Power Specifications:

• 7~28V DC input
  
• 5V *2amp per port

Form Factor:

• 124.34 x 59.51 x 33.61mm (LxWxH) (L) w/ ears)

Package Contents

• CG-4XUH 4 port USB Hub
• 2 pin Phoenix connector
• 6ft USB 3.0 A to B Cable

*Power Supply not included; available as an optional accessory: Model# 12V7A2P-A

The post CG Labs 4 Port USB 3.0 Hub featuring GL 3520 Chipset appeared first on Coolgear.

Specifications:

•  Supports Systems with USB 3.0, USB 2.0 or USB 1.1 Ports
•  Provides 4 USB 3.0 downstream ports which manage up to 5Gbps
•  4 Downstream Type-A ports support Super-speed, High-speed, Full-speed and Low-speed traffic
•  1 Upstream Type-B port for Super-speed, High-speed, Full-speed traffic and Low-speed
•  Transfer rates supported 5Gbps, 480Mbps and 12Mbps speed
•  Supports Self-powered Mode ( DC power source required )
•  Supports up to 900mA USB Bus Power for Each Down-stream Port in standard charging mode
•  Supports Downstream Port Status with LED
•  High power charging mode supported

USB Devices:

•  Supports keyboard, mouse, monitor, cell phone, tablet, scanner, printer, camera, optical drive, memory sticks, external hard drive, joystick, vr headset, modem, PBX and many more.

OS Support:

• Windows 2000, 2003, CE, Vista, Windows 7, and Windows 8, 10
• Linux and Mac OS 10.x

I/O Hardware:

• Supports 4 external USB 3.0 Type-A connectors and 1 Type-B Upstream connector
• Supports 1 2-pin Phoenix connector Terminal Block for external power input.

Environmental Specifications:

• Operating Temp: 0 to 55°C (32 to 131°F)
• Operating Humidity: 5 to 95% RH

Chipset:

• GL3520

Power Specifications:

• 7~28V DC input
  
• 5V *2amp per port

Form Factor:

• 131.08 x 63.01 x 30.56mm (LxWxH)

Package Contents

• CG-4XUHA 4 port USB Hub
• 2 pin Phoenix connector
• Mounting Brackets
• 6ft USB 3.0 A to B Cable

*Power Supply not included; available as an optional accessory: Model# 12V7A2P-A

The post CG Labs 4 Port USB 3.0 Hub featuring GL 3520 Chipset Aluminum Chassis appeared first on Coolgear.

The CG-3X2C3AM is a USB3.1 Gen 1 Type-C PD (Power Delivery) Metal Hub that complies with the Universal Serial Bus (USB) Specifications Revision 3.1 Gen 1 and works up to 5Gbps. It provides 1 USB-C PD-Source capable upstream port and 4 downstream facing ports with1 USB-C and 3 USB-A connectors.

The upstream port can charge the host PC or tablet PC and the USB-C downstream device simultaneously. Only one single power supply is required for both host and devices.
The hub works backward compatible even when any one of downstream port is connected to an USB2.0/1.1 compliant device, or when the upstream port is connected to a USB2.0/1.1 compliant host.

The CG-3X2C3AM provides a unique self-power mode to support fast USB charging specifications by turning its downstream ports from a Standard Downstream Port (SDP) into Charging Downstream Port (CDP) or Dedicated Charging Ports (DCP).

Since the USB is the most popular external port for the devices to connect to PCs, the CG-3X2C3AM provides an ideal solution to expand your USB ports immediately and save your investment.

System

For Systems with USB3.1, USB2.0, or USB1.1 Ports

USB3.1 Gen 1 ports

Provides 4 USB downstream ports (1 USB-C and 3 USB-A) which managing up to 5Gbps:

• Compliant with USB 3.1 Gen 1 Specifications
• Provides 1 USB3.1 Gen 1 Upstream Port with USB-C PD connector
• Provides 4 USB3.1 Gen 1 Downstream Facing Ports (1 USB-C and 3 USB-A connectors)
• PD Supports power source: 20V/5A, 15V/3A, 12V/3A and 5V/3A
• Full-Featured USB-C Port Enables Reversible Plug Orientation and Cable Direction
• Supports 5Gbps, 480Mbps, 12Mbps and 1.5Mbps Speed
• Supports Multi Transaction Translators per Hub
• Supports +12~24V DC Self-power Input Power
• Supports 15KV ESD Surge Protection for Each Port.

USB Devices

Supports keyboard, mouse, monitor, scanner, printer, PC Camera, telephone, DVD drive, joystick, virtual reality helmet, modem, PBX and many more USB devices

I/O Hardware

• Supports 1 USB-C PD Upstream Port Connector, 1 USB-C and 3 USB-A Downstream Port Connectors.
• Supports a 2-pin Terminal Block Connector for external power input from AC adapter

Environmental:

Operating Temp.: 0 to 558C (32 to 1318F)

Storage Temp: -20 to 858C (-4 to 1858F)

Operating Humidity: 5 to 95% RH

Form Factor

5.98”(L)x2.35”(W)x0.93”(H) (15.20 x 5.96 x 2.35 cm)

The post 4 Port USB 3.1 Gen 1 Hub with PD Type C Source Port, 12~24V Variable Voltage Input appeared first on Coolgear.

Description:

The MG-15246 is a USB3.2 Metal Hub that complies with the Universal Serial Bus (USB) Specifications Revision 3.1 Gen 2 and works up to 10Gbps. It provides 1 USB-C upstream port and 4 downstream facing ports with 2 USB-C and 2 USB-A connectors.

With the RISC-like USB controller, it supports simultaneous operation of any combination of SuperSpeed Plus(SS+), SuperSpeed(SS), High-Speed(HS), Full-Speed(FS), and Low-Speed(LS) devices. It is backward compatible with USB1.1, 2.0, USB3.2 Gen 1 legacy devices.

The MG-15246 provides a unique self-power mode to work with wide range (+7~24V DC) input DC power from its DC Jack or 2-pin terminal blocks. It supports fast USB charging specifications by turning its downstream ports from a Standard Downstream Port (SDP) into Charging Downstream Port (CDP) or Dedicated Charging Ports (DCP).

Since the USB is the most popular external port for the devices to connect to PCs, the MG-15246 provides an ideal solution to expand your USB ports immediately and save your USB investment.

Features:

• Compliant with USB3.2 Gen 2 Specification
• Metal Case with Different Mounting Options for Industrial Critical Applications
• Each Port Supports 15KV (air) ESD Surge Protection
• Upstream Facing Port: USB-C Connector
• Downstream Facing Ports: 2 x USB-C and 2 x USB-A
• Supports Type-C and Type-A Screw-Lock Cables
• Detects Flip-able/Reversible Plugging
• Supports 10Gbps (SS+), 5Gbps (SS)480Mbps (HS), 12Mbps (FS) and 1.5Mbps (LS) Speed
• Multi Transaction Translators (TT) per Hub
• Built-in Port Status Indicator LED for Each Port
• Supports Wide Range (+7~24V DC) Self-power Input
• Supports BC 1.2: SDP, CDP and DCP modes
• Charges all 4 USB Ports up to 0.9A Each Simultaneously

The post Port USB 3.2 Gen 2 Industrial Hub Type C x 2 Type A x2 with/ 15KV ESD Surge Protection appeared first on Coolgear.

CG-6PU3DH-A is a robust, industrial-grade 6-port USB 3.0 hub. Expands one USB port into 6 USB3.0 Type-A ports. The Hub fully supports USB3.0 5Gbps (super-speed) USB2.0 480Mbps (high speed) 12Mbps (full speed) and USB1.1 1.5Mbps (low speed) data rates. Power the hub by connecting a 12V Power supply (not included) Provides up to 900mA current to downstream devices. There is no need for any driver or software installation. By plugging the cable from the USB hub to the host USB port of the PC and connecting your USB devices to the downstream port of the hub, the host PC immediately gains 6 USB ports.

• Expands one USB3.0 port into 6 USB3.0 ports
• Compliant with the USB3.0 specification
• Each port provides 5V 900mA power to downstream device
• Supports USB3.0 5Gbps(super-speed) USB2.0 480Mbps (high speed) 12Mbps (full speed) and USB1.1 1.5Mbps (low speed) data rate
• Multiple transaction translator (TT) architecture to each USB downstream (DS) port
• LEDs for power and USB status indication
• Reverse polarity protection to avoid damage to the device
• Includes a DC 12V 5A switching power adapter
• Power supply with latch locking to the hub preventing from accidental disconnection
• Individual port power management
• Overcurrent protection
• Industrial-grade USB3.0 hub with metal case suitable for DIN rail mounting
• CE, FCC approval

The post 6-Port USB 3.0 Hub enclosed in a Rugged Metal Case appeared first on Coolgear.

The CG-6PU3DH-C is a robust, industrial-grade 6-port USB 3.0 hub. Expands one USB port into 6 USB3.0 ports (four type-A and two type-C ports). Supports USB3.0 5Gbps (super-speed) USB 2.0 480Mbps (high speed) and USB1.1/1.0 12Mbps (full speed) / 1.5Mbps (low speed) data rates. It is powered by a high-quality industrial-grade switching power supply and provides up to 900mA current to downstream devices. Plug and Play no drivers to install, Plug the cable from the USB hub to the host USB port of the PC, and connect your USB devices to the downstream ports on the hub.

• Expands one USB3.0 port into 6 USB3.0 ports (four type-A and two type-C connectors)
• Compliant with the USB3.0 specification
• Each port provides 5V 900mA power to downstream device
• Supports USB3.0 5Gbps(super-speed) USB2.0 480Mbps (high speed) 12Mbps (full speed) and USB1.1 1.5Mbps (low speed) data rate
• Multiple transaction translator (TT) architecture to each USB downstream (DS) port
• LEDs for power and USB status indication
• Reverse polarity protection to avoid damage to the device
• Includes a DC 12V 5A switching power adapter
• Power supply with latch locking to the hub preventing from accidental disconnection
• Individual port power management
• Overcurrent protection
• Industrial-grade USB3.0 hub with metal case suitable for DIN rail mounting
• CE, FCC approval

The post 6-Port (4 Type A 2 Type C) USB 3.0 Hub Rugged Metal Case appeared first on Coolgear.

6 USB 3.1 Type-C Gen1 Data Ports

Coolgear’s new CGL-6PC2PAH unique design USB 3.1 dual type 8 Port Hub provides six Type-C data ports and one Type-A data port. The remaining 8th port is a charge only port supporting QC2.0/3.0 quick charging and BC1.2 battery charging standards. Port eight supports up to 25 watts charging for Apple and Samsung devices.

The industrial-grade hub unique feature are its glowing USB-C ports that change from green to blue once connected. This serves as a great visual indicator that a solid port connection has been made. Each of the USB 3.1 Gen1 seven data ports supports up to 1.5A of power output. Operating USB equipment such as printers, scanners, portable drives, virtual reality gear and others are not a problem.

The CGL-6PC2PAH supports self-power through a 2-wire plug from an external 12V power supply (sold separately) which supports the single port #8 25W charging.

USB 3.1 Dual Type Hub Features

• Supports systems with USB Type-A or Type-C ports
• Provides (6) Type-C reversible downstream ports supporting 5Gbps data speeds
• Supports 15KV ESD surge protection for each port
• Supports +7 – 28V DC wide range self-power input through 2-pin terminal plug (power adapter sold separately)
• Is a self-powered hub with a 12V external power supply (sold Separately)
• Compliant with USB 3.1 Gen1 Specifications
• One 25W dedicated charging port / 6 USB-C data ports / 1 USB-A data port
• Compliant with QC2.0/3.0 Quick Charging specifications
• Supports AppleFast and Samsung Charging
• Compliant with battery charging specifications 1.2
• Led indicators each port
• Item Dimensions: 5.46in(L)(6.50 w/ears) x 2.589in(W) x 1.28in(H)
• Item weight: 12.1 oz (.756lbs.)
• Flat surface mountable

The post USB 3.1 Dual Type USB C & A 8 Port Hub with ESD and Surge Protection appeared first on Coolgear.

Compact, Mountable USB 3.1 Gen1 4 Port Hub w/Power Adapter

USB 3.1 powered hub with industrial-grade chassis and surface mounting flanges. The CG-U3MINI4PH is a 5V DC input, generation 1 USB 3.1 hub with ESD and Surge protection. This USB 3.1 Hub will support fast charging for Apple 1A/2.4A and Samsung Galaxy devices. Each port is protected individually to help keep your peripherals safe. The USB 3.1 Hub uses a GL 3510 chip, each port is on an individual circuit to maintain high current and protection. The GL3510 Hub controller chip features native fast-charging and complies with USB-IF battery charging specification rev1.2.

USB 3.1 4 Port Mini Hub Features

• Compliant with USB 3.1 Gen 1 Specification
• Upstream port supports Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
• Downstream ports support SS, HS, FS, and Low-Speed (LS) traffic
• 1 control pipe and 1 interrupt pipe
• Backward compatible to USB specification Revision 2.0/1.1
• Compliant with USB Battery Charging Revision v1.2, supporting CDP, DCP, and ACA-Dock
• Downstream ports can be turned from a Standard Downstream Port (SDP) into Charging Downstream Port (CDP) or Dedicated Charging Port (DCP)
• Downstream devices can be charged while upstream VBUS is not present, which can be applied on wall charger applications
• Upstream port is capable of charging and data communicating simultaneously for portable devices supporting ACA-Dock or proprietary charging protocols
• Supporting Apple 1A/2.1A/2.4A and Samsung Galaxy devices fast-charging
• Compatible with Windows XP, 7, 8,10, and Mac OS X

Specifications

• Chip: GL3510
• USB 3.1 Gen Compliant
• Supports High Speed and Full Speed transmit and Receive
• Complies with USB-IF battery charging specification rev1.2
• Automatic switching between self-powered and bus-powered modes
• Built-in 5 to 3.3V and 5 to 1.2V regulator
• RISC-like architecture
• Item Dimensions: 2.86″(L 3.8″ w/ears) x 1.85(W) x 1.16(H)
• Item Weight: .32 lbs. (5.2 oz)

Package Contents

• USB 3.1 4-Port Hub
• 3Amp 5V DC Mini-Switching Power Adapter
• 6ft. USB A to B Cable for Hub

The post USB 3.1 Powered 4 Port Mini Hub with ESD & Surge Protection appeared first on Coolgear.

The CG-10PU3MGD is a managed USB3.2 Gen 1 (or commonly called USB3.0) hub which is designed to provide rich unique features for industrial applications. It provides an instant expansion of 4 USB3.2 Gen 1 downstream facing ports and keeps the excellent reliability and compatibility with all USB3.2, USB2.0 and 1.1 existing devices.

• Provides 10 USB3.2 Gen 1 Downstream Facing Ports
• Supports 5Gbps, 480Mbps, 12Mbps and 1.5Mbps Speed
• Supports +7~24V DC Wide Range Self-power Input
• Supports 15KV ESD Protection for Each Port.
• Flexible Mounting Options: Wall and DIN Rail Mount

The post 10 Port Managed USB 3.2 Gen 1 Hub w/ 15KV ESD Surge Protection & On/Off Per Port Control Software appeared first on Coolgear.

The CG-10U3AML is a commercial-grade USB3.2 Gen 1 Hub that complies with the Universal Serial Bus (USB) Specifications Revision 3.2 Gen 1 and works up to 5Gbps. It provides 10 downstream facing ports with standard A-type USB 3.2 screw-lock connectors. Each downstream port has a Transaction Translator (TT) for legacy USB devices.

• Adds barcode scanner, serial device, sensor—up to 10 devices—to your host device
• Provides 10 USB3.2 Gen 1 Downstream Facing Ports
• Supports 5Gbps, 480Mbps, 12Mbps and 1.5Mbps Speed
• Supports +7~24V DC Wide Range Self-power Input
• Supports 15KV ESD Protection for Each Port.
• Flexible Mounting Options: Wall and DIN Rail Mount

The post 10 Port USB 3.2 Gen 1 Hub integrated Surge Protection w/ Din Rail Mounting Kit appeared first on Coolgear.

Mini Industrial-grade USB 3.1 Hub

ESD and Surge protection over each individual USB 3.1 port. An industrial-grade USB 3.1 Mini 4 Port Hub that gives you up to 5Gbps of data transfer speed and a surface mount capability. Includes and 5V DC input jack for self-power option.

• Extremely compact industrial-grade hub
• Supports USB 3.1 Gen1 USB specifications at up to 5Gbps data transfer
• Support Self-Powered Mode with 5V DC input jack
• Backward compatible with USB 2.0 / USB 1.1 data speeds

The post USB 3.1 Powered 4 Port Mini Hub with ESD & Surge Protection appeared first on Coolgear.